Question: Can You Over Shock A Pool?

What happens if you swim in a shocked pool?

Chlorine- based shock contains high levels of pH and will alter both your pH and chlorine levels in the pool.

Chlorine- free shock has a neutral pH and will not affect any of your other chemical levels.

And in turn, it will delay your swimmers from returning to the pool..

Should I brush pool before shocking?

Before you start pouring shock in the pool, the very first step is to brush the sides and floor of your pool to loosen all the algae. Doing this breaks the ‘skin’, and allows the pool shock to more easily kill the algae. Once you’ve done this, it is important to make sure you have the proper pH level in your water.

Should I backwash after shocking pool?

Backwash only as needed. Brush the pool vigorously, several times after shocking the pool. Do not use a solar blanket until chlorine and pH level are normal. If chlorine level drops to zero within 24 hours, Repeat the shock treatment.

How much shock Do I put in a 20000 gallon pool?

For instance, if you pool is 20,000 gallons, you will add 4 pounds of shock. Green or Dark Green Pool Water: This means there’s a medium amount of algae in your water and you’ll need to triple shock your pool. Triple shocking requires 3 pounds for every 10,000 gallons of pool water.

How long should you run filter after shocking pool?

24 hoursRun the filtration system While shocking your pool will help kill any germs any algae, it won’t actually get rid of them; for that, you need your filter. So be sure to run your pool filter for at least 24 hours.

How much shock should I put in the pool?

If the water is hazy or cloudy use a full bag per 10K gallons, and if there is algae use 2-6 lbs per 10,000 gals, depending on the extent of the algae bloom. A chlorine level of between 10 ppm and 30 ppm, sustained for several hours, is usually needed to remove algae, bacteria and chloramines.

Why did my pool turn green after I shocked it?

Copper can be the cause of a green swimming pool. … Swimming pool owners may find their pool water turns green after they shock it. When swimming pool water turns green after being shocked, it is generally because there are metal particles in the water.

Do you vacuum a pool on backwash or waste?

You can vacuum a pool on backwash, in theory at least, but it would have no benefit. The water would be pumped backwards through the filter, trapping much of the dirt, before passing out through the backwash hose. This dirt would then end up back in the pool once the pump was back on the filter setting.

How long after shocking pool can I test water?

Turn on your pump filter system to circulate the water. Now, pour the shock/water mixture around the inside perimeter of your pool. The best time to shock is at dusk or night, and then let your pump filter system run overnight. Continue letting the pump to run for about 6 hours and then test the water.

What do you do if you put too much shock in your pool?

You want to avoid adding excess chlorine, so it’s best to wait a few days before testing the water. The best thing you can do if you put too much shock in your pool is to wait it out. Pro tip: the more sunlight your pool water gets, the faster the shock will dissipate.

Can too much shock make your pool cloudy?

Sometimes you’ll get cloudy pool water after shocking. This is common and should dissipate over time. Just keep your filter running and it should clear up. Also, look into a new brand of shock (make sure you buy shock that has a main active ingredient of calcium hypochlorite).

How do I get rid of algae in my pool fast?

How to remove mustard algaeUse a pool water test kit to test and balance your chemical levels.Apply a quality pool shock product and follow the label directions to boost any residual chlorine in your pool.Vigorously brush the pool surface where algae has grown.Remove the dead algae by vacuuming or backwashing.More items…

How many times can I shock my pool?

It’s often recommended to shock your pool once a week. If you don’t do it every week, you should at least do it every other week. This is necessary to maintain your pool’s water chemistry. If you have a lot of people over in your pool or have a party, you may want to shock your pool more frequently.

Can I shock my pool two days in a row?

Will the children swim again? Here’s the deal. It’s pretty tough to over-shock your pool; shocking your pool two days in a row with the proper dosage for your pool volume shouldn’t be a problem – and in fact, is sometimes even needed to rid your pool of algae and other contaminants.

Should pump run when shocking pool?

Shocking your pool is a fairly simple process. … Pour the mixture from the bucket into the water around the edges of the pool. Let the pump run for about 6 hours or more and test the water. Don’t use the pool right away – wait for the free chlorine levels to drop to 1 – 3 ppm before it is safe to swim.